Another useful tool is a paint shield.
Best masking tape for painting skirting boards.
So if you re painting the top edge of the skirting board you ll apply masking tape to the wall where it joins the skirting.
4 make sure you are tight up to the skirting board with the masking tape or slightly overlapping onto the skirting board.
Place the cut straight edge in one corner of the room with the cut straight edge up against the skirting board of one wall and the roll next to the skirting.
3 start in a corner and pull out to the end.
2 find the end of the masking tape and use the roll as a guide holding the tape tight against the skirting board.
How to mask up before painting and how to use masking tape to prepare a room when decorating or varnishing so as to protect carpets windows light switches units glass in window frames etc.
Painting skirting boards can be tricky when you have carpets.
For a really smart finish you should apply masking tape to the edge of the floor.
It works in much the same way as masking tape putting a block between the paint brush and the surface where you don t want paint.
You can also clean with soap and water to ensure the surface is fully prepped for painting.
Rid the skirting board of any dust and loose paint by brushing with a soft brush.
The trick is to mask up the carpet so that you do not get any paint on the carpets.
Paint the skirting boards once you have the masking tape down you can safely paint around the room avoiding any paint reaching the carpet for the best finish possible.
Gloss paint or satin paint the choice is up to you.
Using a paint shield.
Then take your putty knife and press it down in the space between the skirting board and the carpet pushing the tape down and leaving the skirting board fully exposed.
We will be advising on the best type of paint for your skirting board shortly.
Leave the masking tape down if re applying a coat if you notice that you are going to need multiple coats that s usually the case to get the best finish possible.
Masking up with masking tape how to prepare a room for painting or decorating with masking tape.
Wood primer undercoat if you are painting directly to wood only.
Then place the masking tape along where the skirting board meets the floor leaving a slight lip about 1 2 cm 0 20 in that is pressed onto the skirting board itself.